Clamp-on asymmetrical LED bar that throws over 1000 lux onto your desk, keeps the screen glare-free, and uses an ultrasonic sensor plus USB-C power to replace bulky desk lamps.

I’ve run the ScreenBar Pro every day since June and it has permanently replaced the task lamp on my main desk. The asymmetrical optics still throw a measured 1000+ lux down the middle of a 33-by-20-inch workspace while my 32-inch monitor stays glare-free, and the touch-sensitive dimmer plus 2700K-6500K color slider make it easy to match daylight or late-night sessions. The ultrasonic sensor remains the secret weapon: sitting within roughly two feet brings the light up with a gentle fade, and it shuts off five minutes after I leave so it never burns overnight. The revised clamp handled both my flat panel and a borrowed 1000R curved display without wobble, and USB-C power lets it sip directly from my monitor hub instead of adding another wall brick. It’s a spendy upgrade and the motion sensor occasionally trips when someone walks behind the chair, but the combination of eye comfort, freed desk space, and zero flicker fatigue keeps it in my "can’t go back" category for 2025.

Asymmetrical LED monitor light delivers 1000+ lux to your desk without screen glare. Ultrasonic sensor auto-on/off and USB-C power replace bulky desk lamps.

BenQ ScreenBar Pro Monitor Light with Wireless Controller

BenQ ScreenBar Pro Monitor Light

18-port Thunderbolt 4 dock with 40Gb/s bandwidth, dual 4K60/8K display support, 98W charging, 2.5GbE, SD/microSD UHS-II, and USB-C/A 10Gb/s for decluttering USB4 and Thunderbolt workstations.

Another year in and the TS4 is still the anchor of my desk setup. A single Thunderbolt 4 cable from my main laptop continues to drive dual 4K60 displays, dual 10Gb/s NVMe enclosures, 2.5GbE backhaul, and balanced audio gear without flinching, and the 98W host charging keeps pace during long compile or render sessions. I swapped in a USB4 workstation and a compact Linux mini PC this summer; both negotiated full bandwidth, hot-swapped cleanly, and exposed every downstream port with zero driver drama. The front USB-C and USB-A 10Gb/s ports remain my go-to for camera card dumps, and the UHS-II SD/microSD slots are still among the fastest built into any dock I’ve tried. It does run warm—surface temps hover in the mid 40s °C under load—but the aluminum chassis sheds heat silently and the link has yet to drop. The sticker price is still steep, yet consolidating 18 ports, power delivery, and network I/O into one brick has eliminated an entire hub stack on my desk, which keeps it firmly in my must-have kit for 2025.

18-port Thunderbolt 4 dock consolidates your workstation into one cable. Powers laptop, drives dual 4K displays, and includes 2.5GbE plus 10Gb/s USB ports.

CalDigit TS4 Thunderbolt 4 Dock 18-Port with 98W PD

CalDigit TS4 Thunderbolt 4 Dock

65% CNC-aluminum board with double-gasket mount, hot-swappable sockets, and QMK/VIA so you can tailor every layer for coding.

I’ve daily-driven the Keychron Q2 for two years now, and the 2025 batches are even better out of the box. The double-gasket mount plus pre-lubed screw-in stabilizers give the board a soft bottom-out without the ping older runs needed tape mods to tame. I swapped the stock Gateron G Pro Browns for Haimu linear switches in seconds thanks to the south-facing hot-swap sockets, then flashed a custom QMK layout with VIA so layer tap keys handle Vim macros and window snapping. Keychron’s OSA PBT caps still feel great, but I appreciate the standard ANSI plate so I can drop my own GMK sets when I want variety. Weight-wise the solid aluminum case anchors the board while I hammer away, and the USB-C daughterboard plus coiled cable keep my desk tidy. My only gripes: there’s still no wireless option, and at 3.6 lb it’s not a travel board. For a wired, programmable workhorse that feels enthusiast-grade without endless modding, the Q2 remains my top recommendation.

Keychron Q2 65% Mechanical Keyboard with QMK/VIA Firmware

Keychron Q2 Mechanical Keyboard

Ergonomic wireless mouse with MagSpeed scroll wheel, multi‑device pairing, and customizable buttons for productivity.

The MX Master 3S is still my daily driver for coding and video editing. Logitech’s signature shape fits my hand perfectly through 10-hour sessions, and the quieter 3S switches let me click during calls without hammering my mic. MagSpeed scrolling remains magical—flick to zip through hundreds of lines or press to go back to ratchet mode for precision. Logi Options+ has matured a ton: I map the thumb wheel to VS Code tab switching, assign macros per app, and use Flow to drag files between my MacBook and Windows tower seamlessly. Battery life averages about two months per charge, and USB-C quick charging gives me three hours from a one-minute top-off. The only caveats are the premium price and the fact that smaller hands may prefer the Lift Vertical, but if you want a wireless productivity mouse that feels purpose-built for developers, the 3S is still king.

Ergonomic wireless mouse with MagSpeed scroll wheel and multi-device pairing. Customizable buttons via Logi Options+ perfect for developers and power users.

Logitech MX Master 3S Ergonomic Mouse with MagSpeed

Logitech MX Master 3S Mouse

Powered 10‑port USB 3.0 hub for connecting peripherals and charging devices at a desk; tidy expansion for laptops and desktops.

I rely on the Sabrent 10-port hub to wrangle dev boards, audio interfaces, and test SSDs on my bench. The 60 W power brick feeds every port, and the individual on/off toggles mean I can power-cycle a microcontroller or disconnect a bus-powered drive without yanking cables. The blue LED strips are bright out of the box, so I covered them with a strip of matte tape and now they’re perfect status indicators. Transfer speeds hold steady around 350-400 MB/s for SATA SSD enclosures—exactly what you’d expect from a USB 3.0 hub in the chain—and the included 12V/5A brick runs cool even with multiple devices drawing power. A ferrite bead or two helps if you’re sensitive to RF noise, but for Desktop expansion and lab benches, this hub has been rock solid for two years.

Sabrent 10-Port Powered USB 3.0 Hub with 60W Supply

Sabrent 10-Port Powered USB 3.0 Hub

49‑inch curved ultrawide (5120×1440) providing the workspace of dual 27‑inch QHD monitors with immersive curve and high refresh options.

The latest Odyssey G9 (2024 revision) has been on my desk for half a year and it supercharges a dual-monitor workflow without the seam. The 49-inch 32:9 panel still equals two 27-inch QHD displays, but Samsung’s new Mini LED backlight delivers 2,000 nits peak HDR and far better local dimming than the original. I keep VS Code, Docker dashboards, and a browser open simultaneously and still have space for Slack and Grafana. The 1000R curve wraps the peripherals into view while remaining comfortable for long coding sessions. 240 Hz refresh makes scrolling and window dragging buttery, and pairing it with G-SYNC freesync compatibility keeps animations tear-free when I sneak in a racing sim. It does demand serious desk depth and a thorough cable plan, and color accuracy out of the box needs a quick calibration, but if you want a single display to replace dual monitors and level up focus, the G9 delivers.

Samsung Odyssey G9 49-Inch Curved UltraWide Monitor

Samsung Odyssey G9 UltraWide Monitor (49-Inch)

Polished-aluminum LX arm supports wide travel, 360° rotation, and up to 25 lb monitors, freeing desk space while dialing in ergonomic alignment.

My LX arm has survived two apartment moves and countless monitor swaps, and it still feels brand new. The polished aluminum arm easily supports my 32-inch 4K display without sagging, and the spring tension adjustments let me dial in the exact counterbalance so the monitor floats with two fingers. I routinely pivot the screen vertical for code reviews, swing it out for pair programming, or shove it back to free desk space—every hinge still moves smoothly with zero wobble. Installation took about 15 minutes with the included clamp, and the built-in cable channel keeps my USB-C and power leads hidden. It’s a premium arm and you need clearance behind the desk, but the stability and flexibility have made it the best ergonomic upgrade in my office.

Ergotron LX Desk Monitor Arm with Cable Management

Ergotron LX Desk Monitor Arm

USB-C/HDMI KVM switch for controlling two computers with dual 4K displays and shared peripherals from a single keyboard and mouse.

I run my MacBook Pro and Ryzen tower through this dual-monitor USB-C/HDMI KVM, and it handles my pair of 4K/60 displays plus USB peripherals without hiccups. Each computer connects with a single USB-C cable for data, video, and power (up to 100 W pass-through), which keeps the desk tidy. Switching takes about two seconds with the remote puck or keyboard hotkey, and USB devices stay connected—no replugging my Stream Deck or audio interface. There is a tiny HDMI handshake delay and it doesn’t support variable refresh rates, but for productivity setups it’s been flawless. If you need to juggle two machines across dual monitors, this KVM is a lifesaver.

USB-C KVM Switch Dual 4K@60Hz with 100W Power Delivery

USB C KVM Switch 4K@60Hz,Dual Monitor USB C HDMI KVM Switch

Curated work setup products we use and recommend. Each item tested in real-world scenarios. Find 8 products with detailed reviews, pros, and cons.

Work Setup Products